MTS-TECHNIK BMW E46 / 3 SERIES
Coilover Kit Comfort BMW 3 Series / E46
Coilover Kit Comfort MTS Technik for BMW 3 Series / , lowering the front axle between 20 - 70 mm, and rear between 20 - 65 mm.
- High quality confirmed by a 2-year warranty without a mileage limit.
- Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
- The use of twin-tube technology guarantees stable shock absorber performance.
- Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
- Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
- Coilover Kit includes springs made by Eibach, the world leader in the sports springs industry.
- Adjustable Shock Absorbers protected by a double layer of gold zinc and adjustments made of anodized aluminum guaranteeing increased corrosion resistance.
- A complete set ready for assembly, also including sway bar links, adapted for lowering.
- Part.NO MTSGWBM03-C
CAR:
Make BMW
Model 3 Series / E46
Type E46
Engine ALL ENGINES
Year 02/98 - 02/07
TECH SPECS:
Series: comfort Max. Axle Load FA: 1030 kg
Max. Axle Load RA: 1215 kg
Lowering FA: 20 - 70 mm
Lowering RA: 20 - 65 mm
Info: set includes stabilizer links
Instruction: Instruction Installation manual: Installation manual PRODUCT NOTES
1 - When the adjustable spring seat is set too low according the catalogue, all guarantuees will be withdrawn.
2 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
3 - Not for 4x4.
4 - Stabiliser bars included.
5 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
6 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
7 - Including M-Technik.