MTS-TECHNIK VW POLO IV / S

MTS-TECHNIK VW POLO IV / S

€540.00Price

Coilover Kit Sport Volkswagen Polo IV

Coilover Kit Sport MTS Technik for Volkswagen Polo IV, lowering the front axle between 15 - 55 mm, and rear between 20 - 60 mm. Dedicated for the years of: 10/01 - 07/09, for the engine version: 1.2 / 1.2 12V / 1.4 16V / 1.4FSI / 1.4 16V / 1.6 16V / 1.8GTI / 1.4TDI / 1.9SDI / 1.9TDI.

  •  High quality confirmed by a 2-year warranty without a mileage limit.
  •  Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
  •  The use of twin-tube technology guarantees stable shock absorber performance.
  •  Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
  •  Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
  •  Coilover Kit includes springs made by Eibach, the world leader in the sports springs industry.
  •  Adjustable Shock Absorbers protected by a double layer of gold zinc and adjustments made of anodized aluminum guaranteeing increased corrosion resistance.
SKU: MTSGWVW29-S
  • MTS TECHNIK / VW POLO IV

     

    - Part.NO MTSGWVW29-S

    Make

    Volkswagen

    Model

    Polo IV

    Type

    9N

    Engine

    1.2 / 1.2 12V / 1.4 16V / 1.4FSI / 1.4 16V / 1.6 16V / 1.8GTI / 1.4TDI / 1.9SDI / 1.9TDI

    Year

    10/01 - 07/09

    TECH SPECS:

    Series: sport
    Max. Axle Load FA:

    960 kg

    Max. Axle Load RA:

    840 kg

    Lowering FA:

    15 - 55 mm

    Lowering RA:

    20 - 60 mm

    Instruction: Instruction
    Installation manual: Installation manual
  • MTS-TECHNIK VW POLO IV / S

    PRODUCT NOTES

    1 - When the adjustable spring seat is set too low according the catalogue, all guarantuees will be withdrawn.

    2 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).

    3 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.

    4 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.

CATEGORIES

CONTACT US

STORE INFORMATION

UAB "JDV Projects"

Įm.k: 305275380

Pvm: 100012720512

Pelesos g.1 

LT-02161

Vilnius 

Lithuania

+37067655990

© 2018 JD Visual Garage. All Rights Reserved.