MTS-TECHNIK AUDI A4/S4 B5 QUATTRO
Coilover Kit Comfort Audi A4 B5
Coilover Kit Comfort MTS Technik for Audi A4 B5 Sedan / Kombi, lowering the front axle between 40 - 90 mm, and rear between 20 - 80 mm. Dedicated for the years of: 11/94 - 09/01, for the engine version: 1.8 Quattro / 1.8T Quattro / 2.4 Quattro / 2.6 Quattro / S4 Quattro / 2.8 Quattro / 1.9TDI Quattro / 2.5TDI Quattro.
- High quality confirmed by a 2-year warranty without a mileage limit.
- Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
- The use of twin-tube technology guarantees stable shock absorber performance.
- Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
- Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
- Coilover Kit includes springs made by Eibach, the world leader in the sports springs industry.
- Adjustable Shock Absorbers protected by a double layer of gold zinc and adjustments made of anodized aluminum guaranteeing increased corrosion resistance.
- Part.NO MTSGWAU40-C
Make Audi
Model A4 B5 Kombi
Type 8D5
Engine 1.8 Quattro / 1.8T Quattro / 2.4 Quattro / 2.6 Quattro / S4 Quattro / 2.8 Quattro / 1.9TDI Quattro / 2.5TDI Quattro
Year 11/94 - 09/01
TECH SPECS:
Series: comfort Max. Axle Load FA: 1080 kg
Max. Axle Load RA: 1130 kg
Lowering FA: 40 - 90 mm
Lowering RA: 20 - 80 mm
Instruction: Instruction Installation manual: Installation manual PRODUCT NOTES
1 - When the adjustable spring seat is set too low according the catalogue, all guarantuees will be withdrawn.
2 - Front and rear axle height adjustable (threaded shock absorber housing).
3 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
4 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.