MTS TECHNIK BMW 7 SERIES / E38 S

MTS TECHNIK BMW 7 SERIES / E38 S

€840.00Price

Coilover Kit Sport BMW 7 Series / E38

Coilover Kit Sport MTS Technik for BMW 7 Series / E38, lowering the front axle between 15 - 55 mm, and rear between 10 - 80 mm. Dedicated for the years of: 10/94 - 11/01, for the engine version: 728i / 730i / 735i / 740i / 750i / 725tds / 730d / 740d.

  •  High quality confirmed by a 2-year warranty without a mileage limit.
  •  Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
  •  The use of twin-tube technology guarantees stable shock absorber performance.
  •  Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
  •  Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
  •  Coilover Kit includes springs made by Eibach, the world leader in the sports springs industry.
  •  Adjustable Shock Absorbers protected by a double layer of gold zinc and adjustments made of anodized aluminum guaranteeing increased corrosion resistance.
  •  The possibility of additional adjustment not only the height, but also the angle of the wheel position relative to the body.
SKU: MTSGWBM21-S
  • COILOVER KIT BMW 7 SERIES / E38 S

    - Part.NO MTSGWBM21-S

    Make

    BMW

    Model

    7 Series / E38

    Type

    E38

    Engine

    728i / 730i / 735i / 740i / 750i / 725tds / 730d / 740d

    Year

    10/94 - 11/01

    TECH SPECS:

    Series: sport
    Max. Axle Load FA:

    1255 kg

    Max. Axle Load RA:

    1355 kg

    Lowering FA:

    15 - 55 mm

    Lowering RA:

    10 - 80 mm

    Instruction: Instruction
    Installation manual: Installation manual

     

  • MTS TECHNIK BMW 7 SERIES / E38 S

    PRODUCT NOTES

    1 - When the adjustable spring seat is set too low according the catalogue, all guarantuees will be withdrawn.

    2 - Front and rear axle height adjustable (threaded shock absorber housing).

    3 - Only for vehicles without NIVO / OEM pneumatic suspension.

    4 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.

    5 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.

CATEGORIES

CONTACT US

STORE INFORMATION

UAB "JDV Projects"

Įm.k: 305275380

Pvm: 100012720512

Pelesos g.1 

LT-02161

Vilnius 

Lithuania

+37067655990

© 2018 JD Visual Garage. All Rights Reserved.